Welcome to HED Group

Loading...

Tổng tiền:

Cart

Trang chủ

Loading...

Danh mục sản phẩm

Loading...

Sản phẩm bán chạy

RO PRO-LF1

HED GROUP JSC

HED Group - We are proud to supply RO PRO-LF1 membranes from Nitto Denko/ Hydranautics, the manufacturer, in Vietnam.

Liên hệ

Low Fouling Technology


The PRO-LF1 is a unique low fouling spiral wound membrane customized specifically for challenging industrial process applications. This membrane is based on Hydranautics high performance membrane products which have been specially modified to treat a variety of industrial feed streams to handle high TDS and high fouling potential wastewater.

Specified Performance PRO-LF1

Permeate Flow (Nominal) PRO-LF1:7,700 gpd (29.1 m3/d)
Salt Rejection PRO-LF1:99.8% (99.7% minimum)
  
Test Conditions PRO-LF1:32,000 ppm NaCl solution
 800 psig (5.52 MPa) Applied Pressure
 77 °F (25 °C) Operating Temperature
 10% Permeate Recovery
 6.5 - 7.0 pH Range

The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow for individual elements may vary ±15 percent from the value specified.

General Product Description PRO-LF1

Configuration PRO-LF1:Low Fouling Spiral Wound
Membrane Polymer PRO-LF1: Composite Polyamide
 Neutrally Charged Surface
Membrane Active Area PRO-LF1:400 ft2 (37.2 m2)
Feed Spacer:34 mil (0.86 mm)

Packaging: All membrane elements are supplied with a brine seal, interconnector, and O-rings. Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.

Product Use PRO-LF1

Maximum Applied Pressure:1,200 psig (8.27 MPa)
Maximum Chlorine Concentration:< 0.1 ppm
Maximum Operating Temperature:113 °F (45 °C)
pH Range, Continuous (Cleaning):2-11 (1-13) at T ≤ 25 °C
 2-11 (1-12) at T > 25 °C to ≤ 35 °C
 3-10.5 (2-11) at T > 35 °C to ≤ 45 °C
Maximum Feedwater Turbidity:1.0 NTU
Maximum Feedwater SDI (15 mins):5.0
Maximum Feed Flow:85 gpm (19.3 m3/h)
Minimum Brine Flow:12 gpm (2.7 m3/h)
Maximum Pressure Drop for Each Element:15 psi (0.10 MPa)

 

Sản phẩm liên quan